A dripping faucet wastes water every hour of the day, and a worn-out faucet can make a nice kitchen or bathroom feel dated. Whether you need a simple repair or a brand-new fixture, we can help.
We repair cartridges, valves and seals on most faucet types, and we install new kitchen, bathroom, bar and utility faucets, including ones you have already picked out. We also replace the supply lines and shutoff valves when they are worn, so your new faucet is not connected to old, failing parts.
Hard water is tough on faucets here in New Mexico. Mineral buildup can wear out cartridges, clog aerators and leave crust on finishes. If you are seeing a lot of scale, we can also talk about a water softener to help protect your new fixtures.
Common signs you need help
- Dripping or leaking faucets
- Handles that are stiff, loose or hard to turn
- Low flow from the spout
- Leaks at the base of the faucet or under the sink
- Heavy mineral buildup on the faucet
What's included
- Faucet repair, including cartridges and seals
- Kitchen, bathroom, bar and utility faucet installation
- Installation of customer-supplied fixtures
- Supply line and shutoff valve replacement
- Leak check after installation
Ready to stop the drip or upgrade your fixtures? Give us a call.
Match the new fixture to the sink
Before buying a faucet, check the sink's mounting holes, counter thickness, available clearance and how the new spout will reach the basin. A fixture can look right in a photograph but still be a poor fit for the space. Keep the model information and installation instructions available, especially when you supply the faucet yourself. Mention accessories such as a sprayer or filtered-water tap that share the sink area.
For a repair, the leak location helps: water from the spout, around the handle and under the sink can have different causes. Low flow at one faucet may involve an aerator or cartridge rather than whole-house pressure. Let us know the brand if you can identify it without taking the fixture apart. Supply lines and shutoff valves should be considered alongside the faucet, not overlooked during an upgrade.
Preparing for your plumbing visit
Start with a short description of what changed and when you noticed it. Tell us whether the problem is constant or intermittent, which fixtures are affected and what has already been tried. If equipment is involved, a model number or an accessible manufacturer's label can be useful. You do not need to dismantle anything or diagnose the problem yourself. Good background information helps us understand the concern before reviewing the system in person.
Clear the immediate work area where practical, including the cabinet below a sink or the space around equipment. Let us know about pets, locked gates, tenant coordination or other access considerations when you request service. Keep children away from wet floors and work areas. If the property is rented, confirm who can authorize the work. Planning access in advance is often more useful than trying another temporary fix right before the appointment.
Questions to ask before approving work
Ask what appears to be causing the problem, what the proposed work will address and whether there are reasonable repair or replacement alternatives. A useful explanation distinguishes the immediate fault from related equipment that is simply older. Discuss access, likely interruptions to water use and the parts or fixtures involved. The condition of the existing installation can change the practical options, which is why choosing work from a symptom alone is not always reliable.
Confirm the scope before work starts. For a larger project, clarify what is included and what might need separate coordination, such as surrounding finishes or other trades. Ask how the repair or installation will be checked and what maintenance the equipment needs afterward. Avoid assuming that a replacement solves every unrelated pressure, drainage or water-quality issue. The goal is a clear understanding of the work and the next step, not a decision based only on the lowest advertised figure.
Local service and a practical next step
The Plumber is based in Rio Rancho, NM and serves Sandoval County and nearby central New Mexico communities. Plumbing needs vary from property to property, so a recommendation should reflect the equipment, piping and actual symptoms at your home or business. We handle residential and commercial work. Browse the related services below if you are unsure whether your concern involves a fixture, the water supply, hot water equipment or a drain and sewer line.
Call (505) 507-5154 Monday through Friday, 8AM to 5PM, or send a service request with your city and a description of the issue. We can discuss the appropriate next step and scheduling during business hours. For an immediate safety hazard, contact the appropriate emergency service rather than waiting for a website reply. Keep any equipment instructions and prior repair information available so the conversation can focus on your property's needs.
Faucet Repair & Installation FAQ
Can you install a faucet I bought myself?
Yes. We are happy to install customer-supplied faucets.
Is it better to repair or replace a faucet?
Many faucets can be repaired with a new cartridge or seals. If the faucet is old, corroded or hard to find parts for, replacement may make more sense.
Why do my faucets get crusty?
That crust is mineral scale from hard water, which is common in central New Mexico.
